The oilseed in the harvest, in the process of transportation and storage will be mixed with some impurities, so the oilseed import production workshop after the need for further clean-up, the impurity content dropped to within the scope of technical requirements, to ensure that the process effect of oil production and product quality. The impurities contained in oil seeds can be divided into three types: organic impurities, inorganic impurities and oil impurities. Inorganic impurities are mainly dust, sediment, stones, metal, etc., organic impurities are stems and leaves, hull, humilis, hemp, grain and so on, oil impurities are mainly pests and diseases, imperfect granules, heterogeneous oilseeds and so on. We are careless to choose the oil seeds, the impurities within it may harm the oil press equipment in cleaning and separating process. Sand among the seeds may block the machine hardware. Chaff or huller left in the seed absorbs oil and prevents it from being expelled by the oilseed cleaning equipment. Also, stones in the seeds may do damage to screws of the oil mill machine. FOTMA has designed professional oilseed cleaner and separators to hazard these accidents while producing quality products. A efficient vibrating screen is installed to sieve the worst impurities. A suction-style specific grabity destoner was set up to remove stones and mud. Of course, vibrating sieve is one of the essential equipment for oilseed cleaning. It is a screening device for the reciprocating motion of the screen surface. It has high cleaning efficiency, reliable work, so it is widely used to clean the raw material in flour mills, feed production, rice plant, oil plants, chemical plants and other industries classification system. It is a common cleaning machine that widely used in the oilseed processing plant, too.The oil seeds cleaning vibration sieve mainly consists of the frame, feeding box, sieve boday, vibration motor, discharging box and other components(dust suction, etc.).  The honest material nozzle of the gravity table-board has two layers of semi-sieve and can remove part of the big impurities and small impurities. It is suitable for various grains warehousing storage, seeds companies, farms, grain and oil processing and purchase departments.   The principle of oilseeds cleaning sieve is to use the screening method to separate according to the granularity of the material. Materials are fed from the feed tube into the feed hopper. Adjusting plate is used to regulate the flow of materials and make them evenly falls in the dripping plate. With the vibration of screen body, materials flow to the sieve along the dripping plate. Large impurities along the upper layer screen surface flow into the miscellaneous outlet and discharged outside of the machine from the sieve underflow of the upper sieve to the lower sieve plate. Small impurities would fall to the baseboard of the machine body through the sieve hole of the lower sieve plate and discharged through small miscellaneous outlet. Pure materials flow into the net export directly along the lower screen surface. In cleaners and separators, FOTMA also put in place a dust-cleaning system to make sure a clean work environment.1. The amplitude of  oilseeds cleaning sieve is 3.5~5mm, the vibration frequency is 15.8Hz, vibrating direction angle is 0°～45°. 2. When cleaning, the upper sieve plate should be equipped with Φ6, Φ7, Φ8, Φ9, Φ10 sieve mesh. 3. In the preliminary cleaning, the upper sieve plate should be equipped with Φ12, Φ13, Φ14, Φ16, Φ18 sieve mesh. 4. When cleaning other materials, the oilseeds cleaning sieve with appropriate processing capacity and mesh size should be used according to the bulk density (or weight), suspension velocity, surface shape and material size.1. The process is designed according to the characters of the oilseeds targeted and will be more thorough cleaning; 2. To reduce the wear and tear on the follow-up equipment, reduce the dust at workshop; 3. To pay attention to energy saving and environment protection, reduce emission, save cost.